Technology

Aircraft engineered as one system, in India

We design the airframe, propulsion, power, avionics, autonomy and payload together, build them in our Hyderabad lab and test them at our own flying ground. The same engineering carries us from 250-gram FPV drones to the DroneCar.

Drone electronics workbench with tools and components
Electronics workbench in the Agmay lab, Hyderabad

The stack

Seven layers, one aircraft

Each layer is chosen and tuned for the mission, then tested with the others before an aircraft leaves the lab.

  1. 01

    Airframes

    Carbon-fibre frames, folding arms and corrosion-resistant fittings for chemicals, dust and monsoon conditions.

    • Multirotor, coaxial and fixed-wing VTOL layouts
    • Quick-fold arms for transport
    • Sealed avionics bays
  2. 02

    Electric propulsion

    Brushless motors, propellers and power systems matched to each mission, from 250 g FPV to heavy-lift cargo.

    • Coaxial and distributed electric propulsion
    • Thrust-bench tested motor sets
    • Redundant propulsion on heavy platforms
  3. 03

    Energy and power

    Smart lithium battery packs, fast swap routines and tethered ground power for missions that cannot land.

    • Battery health and cycle tracking
    • Tethered power for unlimited endurance
    • Field charging for fleet operations
  4. 04

    Avionics and navigation

    Flight controllers, RTK GNSS, radar terrain following and redundant inertial sensing.

    • RTK centimetre-level positioning
    • Radar terrain following
    • Fail-safe return-to-home and geofencing
  5. 05

    Autonomy and AI

    MissionSmith AI ground control (by Kaelor Labs) and on-board AI pods that detect crops, weeds, defects and obstacles in flight.

    • Edge AI on companion computers
    • Automated obstacle detection and rerouting
    • Multi-drone fleet dispatch
  6. 06

    Payloads and sensors

    Spray systems, granular spreaders, winches, cleaning heads, and thermal, zoom, multispectral and LiDAR sensors.

    • Centrifugal atomisers and flat-fan nozzles
    • 300-bar tethered wash system
    • LiDAR, thermal and multispectral integration
  7. 07

    Data and analytics

    Photogrammetry, GIS and AI analytics that turn every flight into maps, models and reports.

    • Orthomosaics, DSM/DTM and point clouds
    • GIS layers and dashboards
    • AI defect and crop-health detection
  8. Where it leads

    DroneCar

    Every layer scales up into our two-seat electric air vehicle, with redundancy added at each step.

    Discover DroneCar

Software

MissionSmith AI GCS

AI-Integrated Ground Control Station by Kaelor Labs. It plans the mission, flies it with on-board AI and keeps the records operators and regulators need.

  • Real-time edge AI object detection & crop health classification
  • Autonomous 3D terrain-following using real-time elevation models
  • Automated obstacle detection and dynamic corridor rerouting
  • Cloud telemetry synchronisation with sub-second latency
  • Multi-drone fleet mission dispatch & battery cycle management
  • DGCA Digital Sky automated pre-flight log synchronisation
ALTSPDBATMission: auto

How we engineer

From the mission to the maintenance plan

The same five steps for a single custom drone or a fleet of a hundred.

  1. 1

    Specify

    Start from the mission: payload, range, height, duty cycle and the environment it must survive.

  2. 2

    Design

    Airframe, propulsion and power sized in CAD and checked against thrust and endurance targets.

  3. 3

    Build

    Assembled and wired in our Hyderabad lab, with each motor set and power system bench-tested.

  4. 4

    Test

    Hover, endurance, failsafe and payload tests at our flying ground before the aircraft ships.

  5. 5

    Support

    Pilot training, spare parts, repairs and annual maintenance for the life of the aircraft.

Facilities

Labs and flying ground

Design, electronics and assembly in Hyderabad; flight testing and training at our flying ground at SNIST, Ghatkesar.

  • Avionics & Hardware Engineering Lab

    Precision Assembly & Soldering

    Avionics & Hardware Engineering Lab

    Equipped with temperature-controlled soldering stations, digital storage oscilloscopes, RF spectrum analyzers, and multi-protocol motor test benches at our Hyderabad headquarters.

  • Propulsion & Motor Testing Bench

    Thrust & Efficiency Calibration

    Propulsion & Motor Testing Bench

    Specialised dynamometer thrust test benches measuring propeller RPM, power consumption, thermal dissipation, and torque for customized motor pairings.

  • Field Flight Testing Arena (Hyderabad)

    Dedicated Practical Flight Grounds

    Field Flight Testing Arena (Hyderabad)

    Sprawling dedicated obstacle-free flight runway and agricultural crop fields in Hyderabad designed for real-world pilot drills, solo skill checks, and mission rehearsals.

  • Drone Technician Workstations

    Hands-on Student Training

    Drone Technician Workstations

    Individual student workstations outfitted with professional toolkits, flight controller programmers, and diagnostic instruments for full drone teardowns.

Need an aircraft that doesn’t exist yet?

Tell us the payload, range, height and duty cycle. Our engineers will configure the airframe, power system and software around your mission.